DIIGIIT ROBOTICS FORUM

You are not logged in.

#1 2014-10-14 21:31:06

Odysseus
n10b
Registered: 2014-07-08
Posts: 23

Male header with short pin

Hello,

I am looking for male-male pin header, standard 2.54 mm pin spacing but with shorter pin length that the usual 11.5 mm.

Does anybody know if I can find this product somewhere.

I have not been able to find anything like that on the internet.

More precisely, usually standard male-male header have a long and a short pin. Would need something with 2 short pins.

Last edited by Odysseus (2014-10-14 21:33:35)

Offline

#2 2014-10-15 14:38:55

JonHylands
AUV/ROV Expert
Registered: 2014-08-01
Posts: 19
Website

Re: Male header with short pin

I would think a few seconds with a pair of diagonal cutters would do it...

If you want to buy one, search digikey for this part #: 3M12123-ND

- Jon

Offline

#3 2014-10-16 00:11:49

Odysseus
n10b
Registered: 2014-07-08
Posts: 23

Re: Male header with short pin

Thank you John.

This is probably something like that I need.

I have also found that from Toby.

The pin size is similar to the one from Digikey but body size is slightly smaller.

Offline

Board footer