DIIGIIT ROBOTICS FORUM

You are not logged in.

#1 2016-04-03 13:07:05

Diigiit Sales
Member
Registered: 2014-05-26
Posts: 99

No output or no display on Odroid board

Here is a quick list of things to check if you don't see any output on your monitor after you have plugged your Odroid board.

1- Make sure the Odroid board is booting correctly (blinking blue LED)

2- Try another monitor if possible or adjust your monitor settings if monitor accept multiple inputs for example

3- If you are using a DVI cable, make sure boot.ini is properly adjusted

4- Try another HDMI cable if possible

Last edited by Diigiit Sales (2016-04-03 13:23:27)

Offline

Board footer